|
| |
|
|
Applications:
Economical design for indoor lighting such as workshops, supermarkets,
stores, garages or working areas around the home; where you like to save
your lighting energy bill. Equipped with high luminous efficacy
tri-phosphor tubes class A (MEPS approved), this series offer you better
saving and reliable services. For large areas with multiple luminaire
arrays, we recommend to use B1 ballast (with little extra cost) for even
further saving.
Appearance suit most popular shopfronts, buildings or apartments.
|
Features:
- Manufactured to AS/NZS and IEC 60598 safety class 1 for indoor
uses.
- Re-enforced powder-coated steel body.
- Side access starter mount (no need to remove tubes for starter
replacement).
- CE approved tube holders: firm contacts, strong holding.
- Wall mount, direct ceiling mount, or suspension
- 3 cable entries for convenient installation, caps provided for
non-used entries
- Phase correction capacitor as listed below.
- Fully fitted with tri-phosphor tubes, ready to work.
|
Specifications:
- Mains: 240VAC-50Hz,
- Safety Class 1
- Pf=0.90 for Australia & New Zealand, 0.98 with electronic
ballasts for European market.
- EEI=B2 for Australia & EEI=B1 for New Zealand (with ATCO
magnetic ballasts).
CoolBright standard products are
fitted to regulatory compliance, if better energy saving being sought, we
recommend B1 ballast option.
|
Technical Parameters
For Australia and New Zealand:
Model
|
Lamp fitted
|
Current, A
|
Power Factor
|
Capac, uF
|
Length, mm
|
Width, mm
|
Height, mm
|
| EK-8236 |
2xFLT8-36W-D |
0.4 |
0.90 |
8.0 |
1235 |
100 |
70 |
| EK-8136 |
1xFLT8-36W-D |
0.2 |
0.90 |
4.0 |
1235 |
52 |
70 |
| EK-8218 |
2xFLT8-18W-D |
0.2 |
0.90 |
4.0 |
625 |
100 |
70 |
| EK-8118 |
1xFLT8-18W-D |
0.1 |
0.90 |
2.01 |
625 |
52 |
70 |
Note 1: Optional, 4uF capacitor may be fitted, then Pf will be better than 0.90
|
